The MSI GeForce RTX 4070 Ti Gaming X Trio 12GB graphics card feature a 2475MHz gaming and silent boost clock, 2760MHz extreme performance clock, 12GB GDDR6X 192-bit memory interface, 21Gb/s memory speed, 1 x HDMI 2.1, 3 x DisplayPort 1.4a, HDCP support, OpenGL 4.6 and DirectX 12 support.
Boost Clock / Memory Speed
- 2745 MHz (GAMING & SILENT Mode) / 21 Gbps
- 12GB GDDR6X
- DisplayPort x 3 (v1.4a)
- HDMI™ x 1 (Supports 4K@120Hz HDR, 8K@60Hz HDR, and Variable Refresh Rate as specified in HDMI™ 2.1a)
TRI FROZR 3 Thermal Design
- TORX Fan 5.0: Fan blades linked by ring arcs and a fan cowl work together to stabilize and maintain high-pressure airflow.
- Copper Baseplate: The CNC machined nickel-plated copper base captures heat from the GPU and the memory then rapidly transfers it to Core Pipes.
- Core Pipe: A section of square-shape heat pipes make maximum contact over the GPU, then spread the heat to the heatsink.
- Airflow Control: Sections of different heatsink fins disrupt unwanted airflow harmonics and reduce noise.
- Dual BIOS gives you the choice to prioritize full performance in GAMING mode or low noise in SILENT mode.
- Take full control with the most recognized and widely used graphics card overclocking software in the world.
- The exclusive MSI Center software lets you monitor, tweak and optimize MSI products in real-time.
Strength and artistry
MSI envisioned the GAMING series as the favored graphic cards solution for all sorts of gamers, including adventure seekers, esport competitors, livestream broadcasters, and more. GAMING reflects both the spirit of gamers and the intense performance within the cards with a styled exterior that erupts with colorful lights between bold lines and edges.
Tri Frozr 3 thermal design
Stay cool and quiet. MSI’s TRI FROZR 3 thermal design enhances heat dissipation all around the graphics card.
Torx fan 5.0 TORX FAN 5.0 is a culmination of fan design improvements to increase the air pressure and flow into the heatsink. Ring arcs link three sets of fan blades that tilt 22 degrees together to maintain high-pressure airflow even at slower rotational speeds. The resulting increased airflow is +23% compared to an axial fan.
A fan cowl extends a bit beyond the general enclosure to lengthen the wind’s passageway, allowing airflow to stabilize and move smoother through the fans. Bulging notches under the cowl help to reduce recirculation, thus further improving airflow stability and reducing some noise.
Copper baseplate The solid nickel-plated copper base is CNC machined from a single piece of metal. Precision cuts and no welds allows heat from the GPU and memory to be immediately captured by the copper baseplate and then rapidly transferred to the heatsink.
Keeping the core cool Core Pipes are precision-crafted to make maximum use of the available space. A squared section of heat pipes fully touch the GPU baseplate and spread the heat along the full length of the heatsink.
Airflow control Airflow Control improves airflow dynamics through the Wave Curved 2.0, updated deflectors, and Air Antegrade fin design for optimizing the balance between cooling and quieter acoustics.
Air antegrade fin Fins with a V-shaped cutout are located at the airflow passthrough to improve flow efficiency. Optimizing the inclination angle and increasing the wave notch shapes the air resistance towards the center, pushing out warm air faster like a nozzle.
Thermal pads under the sturdy metal backplate provide additional cooling while the flow-through ventilation reduces trapped heat.
Double ball bearing
Two sets of durable ball bearings spin the TORX fans for years of intense and lengthy gaming sessions.
The fans completely stop when temperatures are relatively low, eliminating all noise when active cooling is not needed. The fans will automatically start spinning again when the heat is on during gaming.
Hardening every detail
High-efficiency carbonyl inductors (HCI) Manufacturing and material improvements to our choke parts have culminated as High-Efficiency Carbonyl Inductors (HCI.) One-piece molding allows this design to operate with less choke noise and better electrical filtering.
DrMos DrMOS power stage solutions provide great efficiency with low power loss and enhanced voltage controls.
Change focus when needed Dual BIOS gives you the choice to prioritize full performance in GAMING mode or low noise in SILENT mode.
Effective thermal padding An abundance of clay-based thermal pads provide additional heat dissipation for board components.
Hardened defenses Additional fuses built into the custom PCB provide additional safeguards against electrical damage.
A die-cast anti-bending plate reinforces the whole card while thermal pads allow cooling to reach critical component underneath.
Your support character
A bundled support bracket can be attached to your PC case for additional graphics card reinforcement.
Bringing it all together
MSI’s exclusive MSI Center software helps you get the most out of your MSI products. Monitor, tweak, and optimize in real-time with just a few clicks.
|GeForce RTX™ 4070 Ti GAMING X TRIO WHITE 12G
|Graphics Processing Unit
|NVIDIA® GeForce RTX™ 4070 Ti
|PCI Express® Gen 4
|Extreme Performance: 2760 MHz (MSI Center) Boost: 2745 MHz (GAMING & SILENT Mode)
|DisplayPort x 3 (v1.4a) HDMI™ x 1 (Supports 4K@120Hz HDR, 8K@60Hz HDR, and Variable Refresh Rate as specified in HDMI™ 2.1a)
|16-pin x 1
|Card Dimension (mm)
|337 x 140 x 62 mm
|Weight (Card / Package)
|1613 g / 2522 g
|DirectX Version Support
|OpenGL Version Support
|Digital Maximum Resolution
|7680 x 4320